Sales@bnddental.com Request Information 800.255.2839 toll free | 801.281.4012
Request Order
Full Contour Mode Full contour dirconia sintering at an increased temperature
Quick Mode Single Copings or small Bridges (3 to 4 Unit Bridges)
Custom Modes Create your own Sintering Cycles to fulfill all your Zirconia needs.
Regular Mode Large bridge case or 4 unit bridge case with large Pontic
Request Order
Download AccuSinter Manual
Origin® AccuSinter™ AccuSinter™ has been designed from the ground up with the user experience in mind. Thanks to our quality control system the AccuSinter™ has much better performance when compared to our competitors. Exclusively designed with a smaller chamber size for increased temperature accuracy and heat distribution. Our stackable tray system allows for up to 75 units to sinter per each cycle. The included software is fully programmable and customizable to allow for alternate heating and cooling cycles. This allows for different materials and more consistent zirconia color.
Other attributes include: • Compact Size • Consistent Zirconia color • Eliminate contamination residue • 60 C/min ramp rate • 1600 C Maximum Temperature • Increases Zirconia Production while decreasing cost
For best results we recommend using only genuine Origin Zirconia material
Request Order
AccSuinter Instructions
Full Contour Mode

Full contour dirconia

sintering at an

increased temperature

Quick Mode

Single Copings or

small Bridges

(3 to 4 Unit Bridges)

Custom Modes

Create your own

Sintering Cycles to fulfill

all your Zirconia needs.

Regular Mode

Large bridge case or

4 unit bridge case with

large Pontic

Request Order

Download AccuSinter Manual

Origin® AccuSinter™

AccuSinter™ has been designed from the ground up with the user experience in mind. Thanks to our quality control system the AccuSinter™ has much better performance when compared to our competitors. Exclusively designed with a smaller chamber size for increased temperature accuracy and heat distribution. Our stackable tray system allows for up to 75 units to sinter per each cycle. The included software is fully programmable and customizable to allow for alternate heating and cooling cycles. This allows for different materials and more consistent zirconia color.

Other attributes include:

• Compact Size

• Consistent Zirconia color

• Eliminate contamination residue

• 60 C/min ramp rate

• 1600 C Maximum Temperature

• Increases Zirconia Production while decreasing cost

For best results we recommend using only genuine Origin Zirconia material

Request Order

AccSuinter Instructions
sales@bnddental.com
Request Information
800.255.2839 toll free
Full Contour Mode
Quick Mode
Custom Modes
Regular Mode
For best results we recommend using only genuine Origin Zirconia material